L 102 / A 102
Thickener Based Corrosion Protection
Note :- High Performance Cleaner & Degreaser is available in Both Spray bottle and Liquid can.
HiELube 102
Thickener based corrosion protection
HiELube 102, – Thickener based corrosion protection Spray & Liquid leaves a thin film of lubricant on the surface, which protects it from corrosion. The film can be easily removed using any common solvent, if necessary for any post operation. The product has no effect on paints. It is available in 500 ml aerosol can.
Its liquid version of HiELube 102 is also available.
Applications
- Corrosion Protection for finely machined components, spare parts and moulds.
- Effective for corrosion protection during storage in moderate environments.
- Can be used while transporting without much relative motion between coated items.
Benefits
- Metal parts covered with the product are protected against corrosion.
- Coated parts do not need extensive cleaning before next operation.
- Can be used on painted surfaces also.
- Has no adverse effect on rubber or plastic.
- Coating Can be removed by solvent/ alkaline cleaners or simply by wiping off.
Modes of Action
- Spreads evenly when sprayed
- Solvent evaporates quickly
- Leaves a uniform coating
- Inhibits corrosion
- Protects against corrosion
Physical* properties and performance information – HiELube 102
Thickener based corrosion protection Spray / Liquid
Directions for Use:
(Ensure adequate ventilation before use)
- Shake the can well, before use
- Clean, degrease and dry the surface before application of the product..
- Holding it upright at a distance of about 100 to 200 mm, point towards the area of application, and spray.
- When more thickness of coating is desired, wait for the product to dry and repeat spraying.
- Reverse the can and spray away from the work area to avoid clogging of nozzle.
Directions for Storage
The Propellant is flammable!
- Store in a cool, dry place at <49 deg C and away from heat sources
- As with any new chemical substance, it is recommended that the Material Safety Data Sheet be reviewed prior to use.
Disclaimer
The information contained in the data sheet reflects the state of know-how and the results of tests and application studies. This information can be regarded as indicative for suitable applications and is not necessarily transferable to specific instances. Accordingly, we recommend, that trials be conducted on specific applications before any general product use. No direct or indirect liabilities are accepted unless specified.
Contact Info
Contact us with your enquiries at the following numbers
+91 9148972370
+91 9353792935
+91 9008703310
For More information about the product Please write us
Office Location
No 64, C-2, Hootagalli Industrial Area, MYSORE : 570 018